Industrial workshop divider curtains constructed from heavy duty crystal clear 580gsm PVC at the top and heavy duty coloured 610gsm PVC at the bottom (no PVC top unless 12ft or over) variations of style can be requested. The curtains allow for a cost effective solution to reduce contaminants entering or leaving the work space, with the added advantage that they can be drawn back into a small space, allowing full use of the workshop when needed.

 

As standard the curtains come with quality shark tooth nickel plated eyelets pressed roughly every 30cm at the top and 50cm down each side, also included is a heavy duty tensioned wire fixing kit similar to zip wire. The heavy duty wire fixing kit includes the required length of wire, eyebolt tensioners, wire clamps and clips that mount through the eyelet onto the tensioned wire.

 

Installations consists of simply drilling two holes in your existing framework and placing the eyebolts through as slack as possible with the nut on the back, tension the wire by hand and tighten the wire clamps up at each end and simply wind the nut in until desired tension is achieved. The curtains will then simply clip onto the wire with the snap clips included and slide left to right as required.

 

To achieve corners if creating a box or an "L" shape for example please request extra eyebolts at check out for the corners.

 

This curtains are manufactured in manageable sections (e.g. 20ft wide = Two 10ft sections) and attach together with industrial Velcro fasteners to make the desired width. The hardware supplied allows for hanging in a left to right linear configuration unless specified otherwise at checkout.

 

**Please note the products pictured vary in size and style and are examples of our work and not the listed item**

 

PLEASE DO NOT HESITATE TO CONTACT US IF YOU ARE UNSURE ON ANY ASPECT OF THE PRODUCT, WE MAKE THE CURTAINS TO ORDER THEY ARE NOT STOCK ITEMS, ITEMS MAY BE SUBJECT TO A 20% RESTOCK CHARGE.

12ft High Workshop Divider Curtains (economy wire fixing kit)

£200.00Price
PVC Bottom Colour
Width
  • The item will be shipped in a small package and may crease up in transit, once the package is carefully opened please allow time for creases to fall out. A heat source will speed up the process

  • PVC/POLYESTER
    SPECIFICATION

     

    BASE FABRIC:

    POLYESTER 1100DTEX

    WEIGHT:

    610G PER M²

    ROLL WIDTH:

    150/200 CM

    TENSILE STRENGTH:

    2500/2100 N/5CM

    TEAR STRENGTH:

    310/280 N

    COATING ADHESION:

    100/100 N/5CM

    FR TO

    BS5867 PART 2

    TEMPERATURE

    -30 TO +70 DEGREES

     

    CLEAR UV FR PVC SHEET
    SPECIFICATION

     

    THICKNESS:

    0.50MM

    WEIGHT:

    580G PER M²

    ROLL WIDTH:

    137/180

    FR TO:

    BS5867 PART 2

01246 720191